Showing 13–24 of 48 results
-
Chryso®Aquabeton
Anti-washing additive
Chryso® Aquabéton is a powdered admixture designed for the manufacture of concrete to be poured under water and subjected to disintegration stresses during placement. Thanks to Chryso® Aquabéton, these concretes can be poured without washing and without segregation of the fresh concrete.
-
CHRYSO®Cim
Hanging resin
– Increases the plasticity, cohesion and adhesion to the supports of the mortars in which it is incorporated.
– Improves the mortar’s tensile, abrasion and impact resistance
– Insensitive to hydrolysis, it allows the execution of works intended to be in contact, even permanent, with water, including sea water.
– Lowers modulus of elasticity, eliminates cracking, reduces shrinkage and dusting
– Improves the watertightness of mortars as well as their resistance to oils, greases, fuel and weak acids.
– Mortars for levelling and reprofiling corners or shoulders
– Mortars containing CHRYSO®Cim are harmless and can be brought into contact with foodstuffs. -
CHRYSO®Color P
CHRYSO®Color P concrete powder coloring agents are exclusively based on synthetic metal oxides.
The distinctive feature of CHRYSO®Color P is their excellent coloring potential and a specific surface which is 10 times superior to cement’s.
They are insoluble in water, alkalis and dilute acids, resistant to lime and cement as well as UV and weathering. -
Chryso®Cure HPE
Cure product
Ready-to-use, water-based curing agent for fresh concrete, mortar and other cement-based coatings and on freshly demolded concrete. By forming a film when drying, it greatly slows down the drying of concrete or mortar, which allows a more complete hydration of the cement and reduces the risk of cracking at an early age.
The surface of the treated concrete, after setting, has a better resistance to abrasion. The sprayed surfaces of CHRYSO®Cure HPE are covered with a white film, which makes it possible to identify the treated areas. After drying, the white coloration disappears.
Facilitates floatation and smoothing of concrete. -
Chryso®Deco Wash
CHRYSO®Deco Wash delays the hydration of cement on the unglazed surface of concrete. In contact with fresh concrete, the emulsion breaks down allowing the
The oil phase to form a continuous and protective film, which resists rain and ensures the cure.
Thanks to the originality of its formula and its strong curing power, it is possible with CHRYSO®Deco Wash to widen the washing window from 24 hours to 48 hours, depending on the type of product.
regardless of the weather conditions. The absence of solvents in the formulation of CHRYSO®Deco Wash greatly facilitates its use: product in aqueous phase, non-flammable and with a pleasant odor, does not stain the surrounding materials even if unprotected,
rinsing the spraying and formwork equipment with water. -
CHRYSO®EasyDrain 10
Reinforcer for draining concrete
CHRYSO®EasyDrain R10 lubricates the concrete and significantly improves the ease of pouring.
place: the amount of water required is optimized.CHRYSO®EasyDrain R10 provides a homogeneous concrete. CHRYSO®EasyDrain R10 allows a progressive and homogeneous hydration of the concrete: the curing and hydration of the binder are improved.
CHRYSO®EasyDrain R10 reduces the risk of cracking and loosening of the aggregates.
