Showing 1–12 of 27 results
ADICEM FLOW Self-leveling mortar for large surfaces
Cement-based Levelling Compound for levelling and smoothing For thickness from 1 mm to 15 mm Walk on after 2-3 hours A single layer prepares the surfaces to be covered No grinding required Pumpable Indoor
Download technical data sheetARDEX JK
Fast setting grout for narrow joints
For the grouting of ceramic tiles, mosaic and non-moisture sensitive natural and concrete stones
Cement based
For joint width from 1- 8 mm
Specially design to be used in pools
Crack free
Walkable after 90 minutes
CEM GROUT
Fluid structural non-shrink mortar for filling and anchors
For anchoring metal components
Settling of walls or pillars
No shrinkage
Very high resistance
Certified according UNE-EN 1504-6
EXOCEM FP is a premixed product based on cement, selected aggregates, superplasticizing additives, agents to control shrinkage during the plastic phase (UNI 8996) and the hardened phase (UNI 8147) and polypropylene fibres. After the addition of water, a thixotropic mortar is obtained, strongly adhesive to concrete, bricks and iron, durable and suitable for structural repairs and coatings, without shrinkage.
Download technical data sheet Download FDS
EXOCEM G1 is a premixed product based on cement, selected inerts, super-fluidifying admixtures and agents for shrinkage control both in the plastic phase (UNI 8996) and after setting (UNI 8147). After the addition of water, a superfluid mortar is obtained, without shrinkage, characterized by high mechanical resistance, high impermeability and durability, resistant to sulphates, ideal for the precision anchoring of metal structures or machinery.
Download technical data sheet Download FDSREP MUR AR
current text
REP MUR F
Thixotropic fibre reinforced structural repair mortar
Filling of voids and cracks
Reparation of concrete surfaces
High mechanical properties
With shrinkage compensation
Highly thixotropic, outstanding workability
Can be hand, trowel or spray applied. Thin to thick layers
Fibre reinforced. Chloride-free
Contains corrosion inhibitor additives. Suitable for the preservation
or restoration of the passivation (Principle 7, method 7.1 and 7.2 of EN 1504-9). “Increasing cover with additional mortar and replacing the contaminated or carbonated concrete”
Due to its fine aggregate and light colour there is no need of cosmetic mortar application
Classified R3 according UNE EN 1504-3
Ultra-fast masonry concrete without mixing
Non-structural micro-concrete (not covered by Standard 206-1)
Sealing of vertical elements without mixing (manual or mechanical)
+ signposts
+ fence posts
+ extensions…
High performance grouting, keying and wedging mortar
Indoors and outdoors
– Horizontal and vertical grouting of rebar and anchor rods
– Wedging of plates or rails
– Assembly of reinforced or prestressed concrete elements, keying
– Sealing of construction posts, piers, industrial equipment, stakes, railway rails or overhead cranes
– Under-implementation
Lime mortar for roofing works
Assembly and fixing of tiles.
Treatment of the singular points of the roofing on all types of tiles (flat, channel or interlocking): sealing of ridge tiles, rooster’s ridge, hip, sewer, sponge, banks, nets, flashing, chimney stumps…
Erection of decorative elements (non-load-bearing masonry walls and posts)
Ultra-fast patching mortar
Stopping water inflows in the underground parts of buildings (basements, cellars, retaining walls, garages, pipes, wells, etc.) and in civil engineering works (sewerage networks, etc.).
Download technical data sheet Download FDSProjected waterproofing undercoat
masonry waterproofing undercoat for exterior and interior masonry on walls intended to remain bare or to receive a decorative coating.
Download technical data sheet Download FDS Download DoP Download OFG