Liquid Waterproofing & Bituminous membranes Archives

ARDEX 8+9

ARDEX 8+9
Flexible Cementitious Waterproofing Membrane
Rapid setting and drying – tile on after 90 minutes
Two component compound
Inside and outside use
Simple to apply with a roller, paint brush or trowel
Solvent free
Impact resistant
Fills gaps and plugs holes
Waterproofing, tiling and grouting can be completed in one day
Certified under Normative EN 14891: CM O2P
Download technical data sheet
ARDEX SK12

ARDEX SK12
TRICOM sealing tape

Sealing tapes for flexible and waterproof bridging of movement joints, edge joints as well as connections and penetrations at risk of cracking.
In the system with:
– ARDEX 8+9: Flexible Cementitious Waterproofing Membrane
– ARDEX 7+8: Sealing Adhesive
– ARDEX SK 100W: TRICOM Waterproofing Membrane
Waterproof and weather resistant
Highly tear-resistant and stretchable
Alkali-resistant
Resistant to aggressive media

Download technical data sheet
Armadura PET 50

Polyester armor to consolidate the waterproofing liquid

Polyester armor, designed to increase the strength and durability of liquid sealing coatings. Good flexibility, easy to apply and resistant to cracking.
Download technical data sheet
DANECRAN 100

Separator

DANECRAN 100 is a 100 g/m2 fiberglass fleece, it is used as a separating layer between the substrate and the waterproofing system. This product complies with the DTU 43.1 and the NFP 84-204 standard.
Download technical data sheet
Danofelt PY 200

Polyester Geotextiles

DANOFELT PY 200 is a 200 (+10%;-20%) g/m² non-woven geotextile, formed by a short polyester fiber. It has the CE marking. This product is used as waterproofing protection for terraces, underground constructions, basins, etc., as well as for soil separation and filtration.
Download technical data sheet Download safety data sheet Download DoP
ESTERDAN EQUERRE 25 AP ELAST

Belts and Technical Tracks
Download technical data sheet Download safety data sheet Download DOP
ESTERDAN FM 30 P ELAST

Bituminous waterproofing

ESTERDAN FM 30 P ELAST. is a weldable SBS elastomeric bitumen screed with reinforced polyester reinforcement. It consists of two sides with polyethylene film.
Download technical data sheet Download safety data sheet Download DOP
ESTERDAN PLUS 50/GP ELAST

Membranes with mineral self-protection

ESTERDAN PLUS 50/GP ELAST is a weldable SBS elastomeric bitumen screed with reinforced polyester reinforcement. It is surfaced with black slate flakes. The underside consists of a polyethylene film.
Download technical data sheet Download safety data sheet Download DoP
Glasdan 30P Elast

Plastic Finish Membranes

GLASDAN 30 P ELAST_ is a 60 g/m2 glass mat reinforced, weldable SBS elastomeric bitumen screed. It consists of two sides with polyethylene film.
Download Technical data sheet Download FDS Download DOP
GLASDAN 40/GP ERF ELAST.

Bituminous waterproofing

GLASDAN 40/GP ERF ELAST. is a weldable, self-protected, glass-fleece reinforced, elastomer-modified (SBS) asphalt screed. It is surfaced with green slate flakes. The underside consists of a polyethylene film.
Download technical data sheet Download safety data sheet Download DOP
Glasdan 800P Perforé

Plastic Finish Membranes

GLASDAN 800 P PERF is a weldable modified asphalt screed with a perforated glass mat reinforcement. It is finished with a polyethylene film on both sides.
Download technical data sheet Download safety data sheet
Impridan 100

Cold Print Coating

IMPRIDAN 100 is an organic bituminous primer specially designed for the coating and preparation of substrates such as concrete, steel and wood before welding bituminous membranes, both for horizontal and vertical surfaces.
Download technical data sheet Download safety data sheet