Showing 13–24 of 32 results
-
MANORTEQ
Fixing Glue
Fixing Glue ensures fast and strong fixing of HydroBar Original and HydroBar Evo to concrete. The fast
skin formation and curing allows concrete casting after a few hours.
Fixing glue can be applied with both HydroBar Original and HydroBar Evo.
Download technical data sheet
Download SDS
-
MANORTEQ / FormPlug
FormPlug is used for the watertight sealing of hollow formwork spacers.
FormPlug is simple to install. There is no finishing required.
Download technical data sheet
-
MANORTEQ / HydroBar Original
HydroBar Original is a hydrophilic waterstop made from bentonite clay and butyl rubber that, with its
excellent swelling capabilities, acts as a watertight seal for construction / day joints. Fixing is recommended using Fixing Wire. Alternatively, HydroBar Original canbe fixed using Fixing Glue.
Download technical data sheet
-
MANORTEQ
Completing the Waterproofing
SynMastic is a high quality, one component polyurethane adhesive which swells in contact with water.
Upon contact with water, the mastic can expand up to 450 % of its original volume. It can be used for both HydroBar Original and HydroBar Evo.
Download technical data sheet
Download SDS
-
MANORTEQ / FormRing
FormRing is manufactured from hydrophilic water swellable synthetic rubber. It is an external watertight
sealing ring for formwork spacers/tie bolt sleeves.
Download technical data sheet
-
Cold Print Coating
MAXDAN is a bituminous emulsion of viscous consistency and cold application. It is composed by the dispersion of bitumen particles with an emulsifying agent of anionic character and the incorporation of mineral fillers.
Download technical data sheet
Download FDS
-
Synthetic sealing
Syphoid type rainwater inlet with 80mm vertical outlet, compatible with all hot welded bituminous membranes. Perfectly flame, corrosion and weather resistant, flexible and easy to handle material.
Download technical data sheet
-
Sealing and protection
Paragravillas Universal is a high-density polyethylene protective toad, with a unique dimension and adaptable to different diameters of vertical rainwater outlets.
Download technical data sheet
-
-
Bituminous waterproofing
POLYDAN 180-40 P is a weldable SBS elastomeric bitumen screed with a non-woven polyester reinforcement. It consists either of two sides with polyethylene film POLYDAN 180-40 P or of one side polyethylene film and one side POLYDAN 180-40 PA.
Download technical data sheet
Download safety data sheet
Download DOP
-
Membranes with mineral self-protection
POLYDAN 50/GP GARDEN is a weldable SBS elastomeric bitumen screed with non-woven polyester reinforcement. The bituminous mass contains anti-root admixtures that prevent root penetration through the waterproofing. It is surfaced with dark grey slate flakes. The underside is finished with a polyethylene film.
Download technical data sheet
Download safety data sheet
Download DOP
-
